Phang by Count Vapula (Hard Case Kit)

Our newly redesigned vaporizer bringing you the best in portability, power and pure flavor.

Featuring:
-Dual-use as a collector or as a portable concentrate mod.
-Removable 18650 Battery
-No clog design
-Quality manufacturing & materials
-Variable wattage
-Long run time
-Auto shut-off safety feature
-Customizable glass attachments
-Support you can COUNT on

Specs:

Battery Voltage
Rated voltage
3.7V rechargeable lithium battery cell (steel shell 18650)
Low voltage detect
When the battery voltage is lower than 3.2 ± 0.1v , press the fire button, the red light flashes 5 times and the device enters sleep state, with no voltage output

Working state
After flashing white light  2 times, it goes into hibernation and the static electric current is ‹10uA.
On load - 0.20-2.5Ω
Output way (Constant voltage output)

1. Variable output volts, (3.8v, 4.2v, 4.6v)，(3.8V、4.2V、4.6V) output mode loop switching.
2. When pressing the button 3times within 2seconds: White light flashes 5times = 3.8v output; Blue light flashes 5times = 4.2v output; Green light flashes 5times = 4.6v output; 3. Default 3.8v output

Ready to vape
Press and hold the fire button while pulling vapor. Release the fire button when finished.
Continuous vaping time - 20 seconds per vape

Lock function

1. Press the button 5 times quickly within 2 seconds, the corresponding power light flashes 3 times meaning the battery has been locked. 
2. The Phang incorporates an auto-shutoff safety feature- If there is no use within 5 minutes, the device will shut down automatically.

Unlock function

When the battery is locked, press the button 5 times rapidly within 2 seconds, the corresponding power light flashes 3 times showing battery is turned on.

USB Charging
Adaptor - USB DC 5V
Charging current - 1.0A

Charging State
After connecting the charger, the current battery light will flash 3 times before entering charging mode. While in charging mode, the green light flashes at the breathing rate.
Charging saturation voltage - 4.2v ± 0.05v

Charging saturated state
When the device detects the voltage is 4.2v, the green light indicates the battery cell is full or battery is on.

Protective characteristics
Output short circuit
When vaping and charging, if there is a short circuit at the output end, the red light will flash 3 times to indicate that there is a short circuit at the output end, and turn off the output. In this state, there is no output of power and it is recommended to allow charging time.
Low resistance protection
If the device detects the load resistance value is lower than 0.19Ω, red light flashes 3 times and the battery enters a protection state. Recommend to check atomizer or coil. Make sure that coil is correctly screwed on and that the coil contacts are clean. If you are still experiencing issues, try another coil and/or contact customer support.
Anti-reverse connection protection
Due to using a steel 18650 battery cell, This device has a positive and negative protection feature that will protect the device against reverse battery connection.